Delavan Hydraulic Supply Pump For Sale

Applies to: General Electric MS5001P gas turbines
Model: PV3200 R - 32002 - 9
Serial: 27593 Rated Pressure: 1500 psig.
GE Drawing: 185A1318-P001

This Hydraulic Pump is new old stock (NOS). It was purchased as surplus, inspected and tested to OEM standards. It provides high-pressure hydraulics to servo valves controlling gas or liquid fuel flow and variable inlet guide vanes.

Price: NEGOTIABLE
Contact: luke@pondlucier.com

delavan2Price does not including shipping.  One year warranty from date of shipment.

Young & Franklin Fuel Regulator For Sale

Young & Franklin: Serial Number: 10549
General Electric Drawing Number: 733E813 G2
Application: used on GE gas turbines model series: MS5001K, L or LA

We have a used fully-reconditioned, fully-tested fuel regulator for sale. It can be used on GE gas turbines models listed above. The fuel regulator includes a CCO pump and housing, as shown below.

It will be pre-calibrated to your specifications for firing, accelerating, maximum and minimum values of VCO.pressures.  Also, the governor control and exhaust temperature control will be adjusted to your specific needs.  A copy of your GE Control Specifications-Control System Settings will be required or you should specify where you want the device calibrated.  If done, it should be able to install and operate.

Price: NEGOTIABLE
Contact: luke@pondlucier.com

Price does not including shipping.  One year warranty from date of shipment.

One OilGear Fuel Pump for Sale

Oil Gear model: PVAZKM-054-ZZN
Serial Number: 108441
General Electric Drawing Number: 158A7701-1, Rev, B
Application: GE gas turbines model series MS5001L or LA

Speed: 1800 rpm
Discharge Pressure Rating: 1200 psig
Maximum Fuel Flow: 40 gpm

oilgear_pump2This variable-displacement, radial piston fuel pump was manufactured by Oilgear in the late 1960s It was purchased as surplus from original gas turbine owner. It had been serviced by the OEM and held in dry storage by the owner. PAL inspected the condition of the pump at our hydraulics lab at PAL-Amsterdam.

We are willing to sell it for approximately half the price for a new one if purchased from Oilgear. One pump in stock as of April 2009

Price: NEGOTIABLE
Contact: luke@pondlucier.com

Price does not including shipping.  One year warranty from date of shipment.

NY Airbrake fuel pumps For Sale

Applies to: General Electric MS5001N (Nancy) gas turbines
Speed:
1800 rpm
Flow:
46 gallons per minute (gpm)
Part No:
890853
GE drawing:
235A9508, P-1  Other: 113D2701, Group 4

Fig. 2 to the right shows reconditioned NY Airbrake fuel pump (foreground) before servovalve and LVDT are installed.  Pump in rear has not yet been serviced.

Fig. 3 shows a typical fuel pump installed on a GE gas turbine.  Moog servovalve and linear variable differential transformer (LVDT) are shown on top.  Pumps are sold complete with Moog and LVDT fully serviced and tested.

Price: NEGOTIABLE
Contact: luke@pondlucier.com

Price does not including shipping.  One year warranty from date of shipment

Roper Flow Dividers For Sale

Applies to: General Electric MS5001N or M) gas turbines
Figure: 2528
Type 2
GE drawing:
185A1819, Rev A

Photo shows a typical tandem-style, 10-element flow divider installed on a GE gas turbine.  This generation flow divider did not have a starting motor nor did it have speed pickups.  It was installed on gas turbines with Speedtronic™ Mark I control systems and used in conjunction with either OilGear or NY Airbrake fuel pumps (so called Nancy or Mary machines).

Price: NEGOTIABLE
Contact: luke@pondlucier.com

Price does not including shipping.  One year warranty from date of shipment.

High-pressure Flex Hosing for Flow Dividers For Sale

Applies to: All General Electric MS5001 and 6001 flow dividers.

Photo above shows a typical tandem-style, 10-element flow divider installed on a GE gas turbine with the original steel tubing and Swagelock-to-pipe fittings.

High-pressure, braided flexible hosing: (includes twenty pieces of hosing plus Swagelock AN and pipe fittings, as needed).  Pressure rating: 1000 psig.

Price: NEGOTIABLE
Contact: luke@pondlucier.com

Price does not including shipping.  One year warranty from date of shipment.

Liquid Fuel Transition Piece Assemblies For Sale

Note: these are new old stock (NOS).

First Made for: General Electric
Applies to: GE Gas Turbines
GE Model Series: MS5001L & LA
Nozzle Type: Liquid Fuel with low-pressure atomizing air
General Electric
Drawing Number: 207C3576-G001

Fuel nozzles fully tested by Fern Engineering (flow data included).

Price: NEGOTIABLE
Contact: luke@pondlucier.com

Price does not including shipping.  One year warranty from date of shipment.

PAL ACCEPTS ALL MAJOR CREDIT CARDS
allmajorcards