PAL Turbine Services, LLC has experts who can perform the following services:
- Complete Borescope inspection by an experienced, GE-trained field service engineer. Preliminary findings (tagged digital images) will be provided before the engineer leaves the site. This service also includes a final report with expert editing and a one-over-one technical review of the findings by another expert on the PAL Turbine staff. You will receive a 3-ring binder with the final report with sample images. Also, you will receive the final report on a compact disk for further distribution to your staff.
- Internal turbine or generator alignment can be performed by GE-trained senior field engineers who are fully knowledgeable of the specifications and Tight-wire measurement techniques recommended by the manufacturer.
- Should vibration analysis indicate a problem with the speed reduction (load) gear, disassembly and internal inspection is likely required. Should the Quill Shaft replacement (MS5001 or MS6001 gas turbines) be required, the senior field engineer will accomplish this disassembly, as well as properly install and realign the reduction gear. Furthermore, generator rotor centralization (i.e. setting the magnetic center) can be accomplished to assure safe operation with low vibration.